Products

Connector for mounting sandwich panels in cold stores.

Produced by SWAL since 2008.

Reduces thermal bridge and condensation effect.

It is designed to work with SWAL screws.

.

LAX should be used with a screw with an EPDM washer ∅ 16 mm made of galvanized carbon steel or stainless steel.

FROST-FREE

• Installation time: 30 seconds

• Material: modified polyamide

• RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual order

• Working temperature: -40 to +85°C

• Design load-bearing capacity: 1,97 kN.

• Breaking force: 4,50 kN.

Self-drilling screws for fixing sandwich panels

Fixing max. 6 mm profilees

Minimum steel thickness 1.5 mm

In the case of steel from group 300 and higher than a profile thickness of 4 mm, the IMPACT-R 14 screw should be used.

Anticorrosion coating DACRO™ 500.

Dedicated for environment class C3, C4

,

Material: carbon steel, finishing with DACRO 500 or zinc plated

Washer: A, c16 or c19 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Self-drilling screws for fixing sandwich panels

Fixing max. 14 mm profilees

Minimum steel thickness 4.0 mm

Anticorrosion coating DACRO™ 500.

Dedicated for environment class C3, C4

,

Material: carbon steel, finishing with DACRO 500 or 12 micron galvanizing

Washer:A, c16 or c19 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

An ideal solution for freezer rooms and cold stores where fire resistance is required

stainless steel panels in production rooms, e.g. intended for fish or meat cutting.

It can be used as a kit with a 19 mm EPDM washer or a 22 mm galvanised steel washer.

Sheet metal cladding pre-drilling with a drill bit with diameter 11 mm is required.

.

• Material: modified polyamide with UV protection add-on

• RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

For suspended ceilings in cold stores

The maximum panel length between the shapes is specified in the technical specifications provided by the manufacturer of the panels used for given project.

The T-Shape can be fitted can be made using a fork joint with an M8 threaded rod or an elastic sling.

.

Material: high quality aluminium alloy

Painting: oven baked polyester powder paint

Hole saw for drilling a hole in the slab for LAX

Stainless self-drilling screws for sandwich panels

Drill capacity 5mm

Minimum steel thickness 1.5 mm

,

Material: stainless steel 1.4301, additionally galvanized.

Washer: s16 or s19 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Stainless self-drilling screws for sandwich panels

Mounting to profiles 12.5 mm max.

Minimum steel thickness 4.0 mm

,

Material: stainless steel 1.4301, additionally galvanized.

Washer: s16 or s19 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Self-drilling screws with EPDM washer

Self-drilling, reliable screws

Anticorrosion coating DACRO™ 500.

Dedicated for environment class C3, C4

'

Application: fastening steel sheets with overlapping and to metal constructions

Material: carbon steel, finishing with DACRO 500 or zinc plated.

Washer: c14 or c16 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Stainless self-drilling screws

Self-drilling, reliable screws

Anticorrosion coating DACRO™ 500.

Dedicated for environment class C3, C4

,

Application: fastening steel sheets with overlapping and to metal construction

Material: stainless steel 1.4301

Washer: s14 or s16 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Screw for fixing sandwich panels to wood and concrete

Heavy fixing in wood and concrete

Anticorrosion coating DACRO ™ 1000.

Dedicated for environment class C3, C4

'

Application: fastening panels and sections to wood and concrete

Material: carbon steel, protected with DACRO 1000 or DACRO 500

Washer: A, c16 or c19 + EPDM

Self-tapping screws

Recommendation:fixing min. 0,5mm sheet and panel to wood and metal construction 3mm max

Material: carbon steel zinc plated min.12 microns

Washer: c16 + EPDM

'

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Self-tapping screws zinc plated with hexagonal head

Recommendation: fixing sheet to metal beam min. 1,25 mm max 12 mm

Material: carbon steel zinc plated 12 microns

Washer: c16 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Stainless self-tapping screws with hexagonal head

Recommendation: fixing min. 0,5mm sheet and panel to wood and metal construction 3mm max

Material: stainless steel 1.4301

Washer: s16 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Self-tapping screws zinc plated with hexagonal head

Recommendation: fixing sheet to metal beam min. 1,25 mm max 12 mm

Material: stainless steel 1.4301 

Washers: 16 + EPDM

A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

Cover caps provide the best protection for the screw head

Plastic caps for 8 and 10 mm hexagonal heads

Application: masking screw heads, additional protection against corrosion

Material: polyethylene

Color according to RAL