Products

Active filters

  • LAX

    113.75€

    Connector for mounting sandwich panels in cold stores.

    Produced by SWAL since 2008.

    Reduces thermal bridge and condensation effect.

    It is designed to work with SWAL screws.

    .

    LAX should be used with a screw with an EPDM washer ∅ 16 mm made of galvanized carbon steel or stainless steel.

    FROST-FREE

    Installation time: 30 seconds

    Material: modified polyamide

    RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual order

    Working temperature: -40 to +85°C

    Design load-bearing capacity: 1,97 kN.

    Breaking force: 4,50 kN.

  • WELRO

    75.00€

    For agro plates and halls in the case of the environment.

    WELRO is equipment for the installation of agro-type wall and roof sandwich panels with plastic cladding, plastic-coated sheets or stainless steel sheets and the installation of sandwich panels in a C4 - C5M water environment. It can be installed with a screw with a 19 mm thick EPDM washer or a 22 mm thick galvanized steel washer.

    No pre-drilling required.

     

    Material: modifiable polyamide with appropriate UV Standard

    Colors according to RAL: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

    It can be installed with a screw with a 19 mm thick EPDM washer or a 22 mm thick galvanized steel washer.

  • SHARP-R

    11.00€

    Self-drilling screws with EPDM washer

    Self-drilling, reliable screws

    Anticorrosion coating DACRO™ 500.

    Dedicated for environment class C3, C4

    '

    Application: fastening steel sheets with overlapping and to metal constructions

    Material: carbon steel, finishing with DACRO 500 or zinc plated.

    Washer: c14 or c16 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • Hole saw

    11.25€

    Hole saw for drilling a hole in the slab for LAX

  • FAL suspensions

    to order

    For suspended ceilings

    Rope sling FAL is the elastic system for suspending ceilings comprising a steel rope, grips, washers and couplings.

    The price of the sling is calculated individually for a design.

    The price is determined by the number of elements and the volume of an order.

  • KALOTKA ALU

    32.50€

    Excellent improvement of sheet load capacity

    Protects roofing against ripping off.

    ,

    Material: alloy aluminium with EPDM sealing rubber

    Coated: with polyester powder paint in RAL colours

    RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

    article name t  [mm] w  [mm] s  [mm]   α [°] Q  [mm]
    KALOTKA 25 RAL 25 40 9 23 6,3
    For sandwich panels:  BALEX PU MW, TRIMO, MARCEGAGLIA PU, KINGSPAN MW, PANELTECH PU,  JORIS IDE, ARCELOR
    KALOTKA 30 RAL 30 40 10 24 6,3
    For sandwich panels:  IZOPANEL, KINGSPAN PU, BALEX polistyren, ALAMENTTI 
    KALOTKA 35 RAL 36 36 10 43 6,3
    For sandwich panels:  GÓR-STAL, EUROPANELS, RUUKKI, ARPANEL, ABO 
    KALOTKA 41 RAL 41,5 40 10 56 6,7
    For sandwich panels: PRUSZYŃSKI PU 
  • Girder clamp M8

    to order

    Fastening to steel sections up to 28 mm

    Calculated load capacity - 2.5kN.

  • ALF

    47.50€

    Fastening side lap & trim in fibreglass or vinyl panels

    Recommendation:Fastener for fixing trapezoid and corrugated polycarbonate panels, vinyl, PCV, etc.

    Material: ALF screw: carbon steel protected with 12 micron zinc; EPDM sleeve, Washer: C16 or A19 made of EPDM

  • LAF

    to order

    For suspended ceilings

    LAF is the fixed system for suspending ceilings comprising threaded bars, grips, washers and couplings.

  • WELRO-XL

    87.50€

    An ideal solution for freezer rooms and cold stores where fire resistance is required

    stainless steel panels in production rooms, e.g. intended for fish or meat cutting.

    It can be used as a kit with a 19 mm EPDM washer or a 22 mm galvanised steel washer.

    Sheet metal cladding pre-drilling with a drill bit with diameter 11 mm is required.

    .

    Material: modified polyamide with UV protection add-on

    • RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

  • Hangers for trapezoidal sheet metal

    to order

    Hangers for trapezoidal sheet metal

    Through hole Φ 13 or M8 flange nut.

    Calculated load capacity - 2.5kN.

    The maximum recommended load also depends on the load-bearing capacity of the trapezoidal sheet.

    Before installation, contact the roof constructor to obtain information about the load-bearing capacity of the trapezoidal sheet.

  • IMPACT-R 6

    16.80€

    Self-drilling screws for fixing sandwich panels

    Fixing max. 6 mm profilees

    In the case of steel from group 300 and higher than a profile thickness of 4 mm, the IMPACT-R 14 screw should be used.

    Anticorrosion coating DACRO™ 500.

    Dedicated for environment class C3, C4

    ,

    Material: carbon steel, finishing with DACRO 500 or zinc plated

    Washer: A, c16 or c19 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • Other sling elements

    to order

    For suspended ceilings

    Snap hook with security

    EYE-EYE

  • IMPACT-R 14

    36.50€

    Self-drilling screws for fixing sandwich panels

    Fixing max. 14 mm profilees

    Anticorrosion coating DACRO™ 500.

    Dedicated for environment class C3, C4

    ,

    Material: carbon steel, finishing with DACRO 500 or 12 micron galvanizing

    Washer:A, c16 or c19 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • VAN sleeve

    26.50€

    Provides perfect fixation thanks to the use of two components.

    .

    Depending on the type of surface, the gray element made of high-quality nylon automatically adapts to the optimal holding method (expanding, folding, rolling), ensuring the best fastening.

    .

    Red expansion wings support expansion and additionally protect the gray element. The stud screws in easily and tightens precisely at the end, eliminating the risk of over-tightening. The specially formed edge of the pin prevents it from falling into the hole.

    .

    Application: installation of sandwich panels on silicate bricks, foamed concrete, perforated bricks

    Material: poliamid    

    .

    .

                     Light concrete                        Sandwich panel

                      The pin expands in four directions

  • KAP

    12.50€

    Cover caps provide the best protection for the screw head

    Plastic caps for 8 and 10 mm hexagonal heads

    Application: masking screw heads, additional protection against corrosion

    Material: polyethylene

    Color according to RAL

  • T-profil

    to order

    For suspended ceilings in cold stores

    The maximum panel length between the shapes is specified in the technical specifications provided by the manufacturer of the panels used for given project.

    The T-Shape can be fitted can be made using a fork joint with an M8 threaded rod or an elastic sling.

    .

    Material: high quality aluminium alloy

    Painting: oven baked polyester powder paint

  • VCAT

    22.50€

    Screw for fixing sandwich panels to wood and concrete

    Heavy fixing in wood and concrete

    Anticorrosion coating DACRO ™ 1000.

    Dedicated for environment class C3, C4

    '

    Application: fastening panels and sections to wood and concrete

    Material: carbon steel, protected with DACRO 1000 or DACRO 500

    Washer: A, c16 or c19 + EPDM

  • SHARP-S stainless

    81.43€

    Stainless self-drilling screws

    Self-drilling, reliable screws

    Anticorrosion coating DACRO™ 500.

    Dedicated for environment class C3, C4

    ,

    Application: fastening steel sheets with overlapping and to metal construction

    Material: stainless steel 1.4301

    Washer: s14 or s16 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • IMPACT-S 5 stainless

    86.43€

    Stainless self-drilling screws for sandwich panels

    Drill capacity 5mm

    ,

    Material: stainless steel 1.4301, additionally galvanized.

    Washer: s16 or s19 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • IMPACT-S 14 stainless

    108.64€

    Stainless self-drilling screws for sandwich panels

    Mounting to profiles 12.5 mm max.

    ,

    Material: stainless steel 1.4301, additionally galvanized.

    Washer: s16 or s19 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • TAP-A

    26.61€

    Self-tapping screws

    Recommendation:fixing min. 0,5mm sheet and panel to wood and metal construction 3mm max

    Material: carbon steel zinc plated min.12 microns

    Washer: c16 + EPDM

    '

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • TAP-B

    26.63€

    Self-tapping screws zinc plated with hexagonal head

    Recommendation: fixing sheet to metal beam min. 1,25 mm max 12 mm

    Material: carbon steel zinc plated 12 microns

    Washer: c16 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • KALOTKA S stainless

    63.75€

    KALOTKA excellent improvement of sheet load capacity

    Protects roofing against ripping off.

    .

    Material: stainless steel 1.4301 with sealing rubber

    Coated: with polyester powder paint in RAL colours

    RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

    article name t  [mm] w  [mm] s  [mm]   α [°] Q  [mm]
    KALOTKA 25 RAL 25 40 9 23 6,3
    For sandwich panels:  BALEX PU MW, TRIMO, MARCEGAGLIA PU, KINGSPAN MW, PANELTECH PU,  JORIS IDE, ARCELOR
    KALOTKA 30 RAL 30 40 10 24 6,3
    For sandwich panels:  IZOPANEL, KINGSPAN PU, BALEX polistyren, ALAMENTTI 
    KALOTKA 35 RAL 36 36 10 43 6,3
    For sandwich panels:  GÓR-STAL, EUROPANELS, RUUKKI, ARPANEL, ABO 
    KALOTKA 41 RAL 41,5 40 10 56 6,7
    For sandwich panels: PRUSZYŃSKI PU 
  • KALOTKA R

    to order

    Excellent improvement of sheet load capacity

    Protects roofing against ripping off.

    .

    Material: ALUMINIUM with a rubber sealing

    Coated: with polyester powder paint in RAL colours

    RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

    ,

    SOON ON SALE

  • TAP-S A Stainless

    115.00€

    Stainless self-tapping screws with hexagonal head

    Recommendation: fixing min. 0,5mm sheet and panel to wood and metal construction 3mm max

    Material: stainless steel 1.4301

    Washer: s16 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.

  • TAP-S B Stainless

    61.95€

    Self-tapping screws zinc plated with hexagonal head

    Recommendation: fixing sheet to metal beam min. 1,25 mm max 12 mm

    Material: stainless steel 1.4301 

    Washers: 16 + EPDM

    A screw head may be covered with a protective cap in a RAL colour or painted with polyester powder paint.