Suspended Ceilings

Connector for mounting sandwich panels in cold stores.

Produced by SWAL since 2008.

Reduces thermal bridge and condensation effect.

It is designed to work with SWAL screws.

.

LAX should be used with a screw with an EPDM washer ∅ 16 mm made of galvanized carbon steel or stainless steel.

FROST-FREE

• Installation time: 30 seconds

• Material: modified polyamide

• RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual order

• Working temperature: -40 to +85°C

• Design load-bearing capacity: 1,97 kN.

• Breaking force: 4,50 kN.

For agro plates and halls in the case of the environment.

WELRO is equipment for the installation of agro-type wall and roof sandwich panels with plastic cladding, plastic-coated sheets or stainless steel sheets and the installation of sandwich panels in a C4 - C5M water environment. It can be installed with a screw with a 19 mm thick EPDM washer or a 22 mm thick galvanized steel washer.

No pre-drilling required.

Material: modifiable polyamide with appropriate UV Standard

Colors according to RAL: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual

It can be installed with a screw with a 19 mm thick EPDM washer or a 22 mm thick galvanized steel washer.

For suspended ceilings in cold stores

The maximum panel length between the shapes is specified in the technical specifications provided by the manufacturer of the panels used for given project.

The T-Shape can be fitted can be made using a fork joint with an M8 threaded rod or an elastic sling.

.

Material: high quality aluminium alloy

Painting: oven baked polyester powder paint

Fastening to steel sections up to 28 mm

Calculated load capacity - 2.5kN.

Hangers for trapezoidal sheet metal

Through hole Φ 13 or M8 flange nut.

Calculated load capacity - 2.5kN.

The maximum recommended load also depends on the load-bearing capacity of the trapezoidal sheet.

Before installation, contact the roof constructor to obtain information about the load-bearing capacity of the trapezoidal sheet.

For suspended ceilings

Snap hook with security

EYE-EYE

An ideal solution for freezer rooms and cold stores where fire resistance is required

stainless steel panels in production rooms, e.g. intended for fish or meat cutting.

It can be used as a kit with a 19 mm EPDM washer or a 22 mm galvanised steel washer.

Sheet metal cladding pre-drilling with a drill bit with diameter 11 mm is required.

.

• Material: modified polyamide with UV protection add-on

• RAL colours: 7044, 9002, 9003, 9005, 9006, 9007, 9010 - other to individual